Pipe Threading Machine for water or gas pipe
- Spindle Support
- Hammer Chuck
- Efficient Cutter
- Automatic Die-Head
- Sharp Reamer
- Cutting Oil Pump
- Powerful Electric Motor
Description
| A. Spindle Support The spindle is supported by Sealed Ball Bearings ensuring correct alignment and continued accuracy through lack of wear. |
B. Hammer Chuck The Jaw Body is wider giving greater load capacity and durability. The increased movement range of the Jaw Insert improves the centripetal clamping feature. The non-slip impact clamping Hammer Chuck provides a secure base for perfect threading, cutting & reaming. |
C. Efficient Cutter The special design gives easy, quality cuts and durability. |
| D. Automatic Die-Head The recding self opening system ensures the standard degree of 1/16 taper thread and the smooth threading with low resisance of Dies. |
E. Sharp Reamer The design and accurate machining of the special forged material give smooth reaming. |
|
 |
||
| F. Cutting Oil Pump The high capacity Gear Pump operates at low revolutions for longer life. |
H. Powerful Electric Motor Class F insulation grade on the motor allows continuous operation. More than sufficient Hosepower; Beaver 50 - Input :1150W Output :750W, Beaver 80 & 100 - Input :1700W Output :1140W |
J. Guide Bar The smooth surface avoid wearing and Carriage can travel on them with less power |
| G. Gear Box The precision machining and closely controlled Heat Treatment give smooth power transmission and low wear. |
I. Stable Carriage There is large contact surface area between Carriage and Guide Bars. Combined with close tolerance machining and high abrasion hardness, this ensures minimum wear and avoids a loose fit to give highest quality threads. |
K. Strong Frame The casting of the frame in one piece ensuresaccurate location and support of the Guide Bars and Spindle. |
Spesifikasi
| Model | BEAVER 100 |
| Threading Capacity | Pipe 1/4~4", Bolt 3/8~2" M10~42mm, Condult 19~75mm 1/2~3" |
| Motor | Universal Single Phase Input 1700W Output 1140W 50/60Hz *Voltage made to order |
| Spindle Speed | 48.18rpm(2 Speed) |
| Weight | 105kg |
| Dimensions | 790(L) x 540(W) x 480(H) mm |
| Standard Accessories (BSPT or NPT) |
Die-Head BE1/2 ~ 2" (Auto) AT2.1/2 ~ 4" (Auto) |
| Dies BE1/2 ~ 3/4" BE1 ~ 1.1/2"(2") AT2.1/2 ~ 4" |