

Pipe Threading Machine for water or gas pipe
- Spindle Support
- Hammer Chuck
- Efficient Cutter
- Automatic Die-Head
- Sharp Reamer
- Cutting Oil Pump
- Powerful Electric Motor
Description
A. Spindle Support The spindle is supported by Sealed Ball Bearings ensuring correct alignment and continued accuracy through lack of wear. |
B. Hammer Chuck The Jaw Body is wider giving greater load capacity and durability. The increased movement range of the Jaw Insert improves the centripetal clamping feature. The non-slip impact clamping Hammer Chuck provides a secure base for perfect threading, cutting & reaming. |
C. Efficient Cutter The special design gives easy, quality cuts and durability. |
D. Automatic Die-Head The recding self opening system ensures the standard degree of 1/16 taper thread and the smooth threading with low resisance of Dies. |
E. Sharp Reamer The design and accurate machining of the special forged material give smooth reaming. |
|
![]() |
||
F. Cutting Oil Pump The high capacity Gear Pump operates at low revolutions for longer life. |
H. Powerful Electric Motor Class F insulation grade on the motor allows continuous operation. More than sufficient Hosepower; Beaver 50 - Input :1150W Output :750W, Beaver 80 & 100 - Input :1700W Output :1140W |
J. Guide Bar The smooth surface avoid wearing and Carriage can travel on them with less power |
G. Gear Box The precision machining and closely controlled Heat Treatment give smooth power transmission and low wear. |
I. Stable Carriage There is large contact surface area between Carriage and Guide Bars. Combined with close tolerance machining and high abrasion hardness, this ensures minimum wear and avoids a loose fit to give highest quality threads. |
K. Strong Frame The casting of the frame in one piece ensuresaccurate location and support of the Guide Bars and Spindle. |
Spesifikasi
Model | BEAVER 80 | BEAVER 80AT |
Threading Capacity | Pipe 1/4 ~ 3" | |
Bolt 3/8 ~ 2" M10 ~ 42mm | ||
Conduit 19 ~ 75mm 1/2 ~ 3" | ||
Motor | Universal Single Phase Input 1700W Output 1140W 50/60Hz *Voltage made to order |
|
Spindle Speed | 33rpm(No load) | |
Weight | 74kg | |
Dimensions | 680(L) x 480(W) x 420(H) mm | |
Standard Accessories (BSPT or NPT) | Die-Head 1/2 ~ 2" (Manual) 2 ~ 3" (Manual) Dies BE1/2 ~ 3/4" BE1 ~ 1.1/2"(2") 2 ~ 3" |
Die-Head BE1/2 ~ 2" (Auto) AT2.1/2 ~ 3" (Auto) Dies BE1/2 ~ 3/4" BE1 ~ 1.1/2"(2") AT2.1/2 ~ 3" |